MOT Status
ExpiredMileage
137,321 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside inner and outer sills surface corrosion
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside inner and outer sills surface corrosion
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
hand brake travel long
slight brake bind n/s/f
Nearside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
sills have corrosion
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
sills have corrosion
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Child seat fitted not allowing full inspection of adult belt
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Items removed from driver's view prior to test
Non obligatory mirror damaged
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Centre Stop lamp not working (1.2.1b)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
Items removed from driver's view prior to test
Non obligatory mirror damaged
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Under-trays fitted obscuring some underside components
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Under-trays fitted obscuring some underside components
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Stop lamp not working (1.2.1b)
exhaust corroded
front pads close to limit
rear pads low
rear suspension arm bushes perished
surface corrosion underside of vehicle
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV06 XEA is a 2006 Mazda 6 in Black with a 1,999cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2006 Mazda 6 models, the average MOT pass rate is 74.4% with a typical mileage of 76,651 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CV06 XEA, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 20 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV06 XEA?
You can check the full history of CV06 XEA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV06 XEA registered?
CV06 XEA is a 2006 Mazda 6, first registered on 11 May 2006.
Is CV06 XEA safe to buy?
The MOT history for CV06 XEA shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV06 XEA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV06 XEA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.