MOT Status
ExpiredMileage
143,099 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear stoplight inoperative (advised has been disconnected)
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front bumper taped on sides but secure
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front outer wing corroded and taped
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear subframe and suspension components corroded
battery loose in carrier but can not fall from carrier
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer not working (3.5 (a))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive seat beat mounting area (7.1.1 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive seat belt mounting area (7.1.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front of trailing arm mounting area/inner sill (5.3.6 (a) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive front of trailing arm mounting area/inner sill (5.3.6 (a) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))
Windscreen washer not working (3.5 (a))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front of trailing arm mounting area/inner sill (5.3.6 (a) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive front of trailing arm mounting area/inner sill (5.3.6 (a) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front mounting area for trailing arm (5.3.6 (a) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive front area for trailing arm (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Headlamp levelling device inoperative (4.1.5 (a))
Rear Exhaust system insecure (6.1.2 (a))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front mounting area for trailing arm (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive front area for trailing arm (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Brake lamp not working
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a pin/bush Rear (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
crack in windscreen outside of swept area
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
crack in windscreen outside of swept area
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV08 FGM is a 2008 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CV08 FGM, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV08 FGM?
You can check the full history of CV08 FGM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV08 FGM registered?
CV08 FGM is a 2008 Mazda 3, first registered on 1 March 2008.
Is CV08 FGM safe to buy?
The MOT history for CV08 FGM shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV08 FGM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV08 FGM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.