2008 Ford Ka

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

extensive surface corrosion and welding reapairs to sills/inner arches /floors etc.

some rust in brake pipes and fittings and ferrules

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear coil spring broken or misaligned (2.4.C.1a)

front brake application uneven (3.7.B.2)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

extensive surface corrosion and welding reapairs to sills/inner arches /floors etc.

some rust in brake pipes and fittings and ferrules

Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

rust/welding to underbody

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded 'inner sill' (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch, 'outer' (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch, chassis (2.4.A.3)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch, chassis (2.4.A.3)

Offside Front coil spring broken snapped top and bottom of the spring (2.4.C.1a) DANGEROUS

Parking brake lever has little reserve travel (3.1.6b)

general vehicle corrosion

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Rear Radius arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

rear brake application uneven (3.7.B.2)

Body has slight corrosion (6.1.B.2)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Horn not working (1.6.2a)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

light surface corosion underbody general treatment reqd

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

some/wear/showing/front/suspension/bushes.

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in offside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

some/wear/showing/front/suspension/bushes.

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring fractured (2.4.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)