MOT Status
ExpiredMileage
97,155 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose slightly damaged (1.1.12 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake hose excessively twisted touching wheel rim (1.1.12 (b) (ii))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Brake hose excessively damaged (1.1.12 (b) (ii))
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose slightly damaged (1.1.12 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre perished/cracked
Offside Seat belt anchorage prescribed area is excessively corroded sill area (5.2.6)
Nearside Front Tyre perished/cracked
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Outer Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
ATTENTION reqd oil leak to engine
Offside Front Road wheel slightly damaged (4.2.A.1a)
Outer Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)
ATTENTION reqd oil leak to engine
Nail in nearside rear tyre
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres wearing on inner edges.
Nearside Headlamp aim too low (1.8)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp aim too low (1.8)
Nail in nearside rear tyre
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres wearing on inner edges.
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Rear fog lamp switch faulty (1.3.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV08 YXZ is a 2008 Ford Ka in Black with a 1,297cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CV08 YXZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV08 YXZ?
You can check the full history of CV08 YXZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV08 YXZ registered?
CV08 YXZ is a 2008 Ford Ka, first registered on 31 March 2008.
Is CV08 YXZ safe to buy?
The MOT history for CV08 YXZ shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV08 YXZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV08 YXZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.