MOT Status
ExpiredMileage
109,309 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin Both ( Heavily worn ) (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
General under body corrosion
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin Both ( Heavily worn ) (1.1.13 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
General under body corrosion
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
underbody has general corrosion
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
TPMS Light On
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Upper Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
TPMS Light On
Nearside Front front brakes release unevenly (3.7.B.4)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
showing minor rusting underside
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front position lamp(s) not working both (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Inner Brake pad(s) wearing thin both (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Under-trays fitted obscuring some underside components
sill covers fitted
Nearside Headlamp aim too low (1.8)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)
Under-trays fitted obscuring some underside components
sill covers fitted
Under-trays fitted obscuring some underside components
outer sill covers and inner wheel arch covers fitted.
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV09 MWA is a 2009 Mazda 6 in Blue with a 2,488cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2009 Mazda 6 models, the average MOT pass rate is 75.8% with a typical mileage of 85,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CV09 MWA, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 17 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV09 MWA?
You can check the full history of CV09 MWA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV09 MWA registered?
CV09 MWA is a 2009 Mazda 6, first registered on 28 March 2009.
Is CV09 MWA safe to buy?
The MOT history for CV09 MWA shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV09 MWA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV09 MWA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.