MOT Status
ValidMileage
147,170 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion on suspension components and rear axle
Parking brake efficiency below requirements (1.4.2 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion on suspension components and rear axle
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
corrosion on suspension components and rear axle
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Track rod end ball joint has excessive play O/S & N/S (2.1.3 (b) (i))
Front Tyre tread depth below requirements of 1.6mm O/S & N/S (5.2.3 (e)) DANGEROUS
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Oil leak, but not excessive Turbo pipe/intercooler (8.4.1 (a) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
slight corrosion on suspension components
Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
slight corrosion on suspension components
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Headlamp aim too far to the right (1.8)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Kia Rio?
Based on 1,637,344 MOT tests across 141,212 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV10 MBU is a 2010 Kia Rio in Black with a 1,493cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2010 Kia Rio models, the average MOT pass rate is 74.8% with a typical mileage of 56,182 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Rio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,517 recorded failures. If you're considering buying CV10 MBU, it's worth having these areas checked by a mechanic before committing.
The Kia Rio typically stays on UK roads for around 25 years. At 16 years old, this Kia Rio is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CV10 MBU?
You can check the full history of CV10 MBU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV10 MBU registered?
CV10 MBU is a 2010 Kia Rio, first registered on 19 March 2010.
Is CV10 MBU safe to buy?
The MOT history for CV10 MBU shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV10 MBU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV10 MBU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.