2001 Peugeot 206

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear tyres wearing on inner edges

n/s/f tyre outer edge

Brake load sensing valve seized (3.6.E.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear tyres wearing on inner edges

n/s/f tyre outer edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front Steering system excessively rough (2.2.D.1)

Offside Side repeater incorrect colour (1.4.A.2f)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Brake load sensing valve linkage stiff (3.6.E.3)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Side repeater slightly discoloured (1.4.A.2f)

Rear axle has slight corrosion

Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Brake load sensing valve linkage stiff (3.6.E.3)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Side repeater slightly discoloured (1.4.A.2f)

Rear axle has slight corrosion

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Radius arm corroded but not seriously weakened (2.4.G.1)

coil spring corroded (2.4.C.1b)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too high (1.8)

Rear Radius arm corroded but not seriously weakened (2.4.G.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

coil spring corroded (2.4.C.1b)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Shock absorber has a light misting of oil (2.7.3)

Slight perishing to both rear tyre walls

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)