MOT Status
ExpiredMileage
120,095 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Non obligatory mirror damaged
Brake load sensing valve seized (3.6.E.3)
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Non obligatory mirror damaged
Parking brake lever has little reserve travel (3.1.6b)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Fuel tank straps corroded
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside front tyre worn on inner edge
Offside rear tyre worn on inner edge
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside rear brake binding (3.7.B.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Side repeater incorrect colour (1.4.A.2f)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Fuel tank straps corroded
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Headlamp aim too high (1.8)
Offside front tyre worn on inner edge
Offside rear tyre worn on inner edge
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Child seat fitted not allowing full inspection of adult belt
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Battery insecure
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Rear Direction indicators incorrect colour (1.4.A.2f)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS
Battery insecure
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Spare wheel carrier insecure (6.4.2)
Battery insecure
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly pitted (3.5.1h)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV51 JZL is a 2001 Peugeot 206 in Black with a 1,124cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 57.1%.
Across all 2001 Peugeot 206 models, the average MOT pass rate is 66.3% with a typical mileage of 67,765 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying CV51 JZL, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 25 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV51 JZL?
You can check the full history of CV51 JZL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV51 JZL registered?
CV51 JZL is a 2001 Peugeot 206, first registered on 28 September 2001.
Is CV51 JZL safe to buy?
The MOT history for CV51 JZL shows 14 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV51 JZL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV51 JZL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.