2005 Aprilia RS 50

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake disc worn, pitted or scored, but not seriously weakened scored (1.1.14 (a) (ii))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Valve stem slightly damaged (5.2.3 (j))

Front Brake disc insecure (1.1.14 (a) (ii))

Nearside Handlebar mounting clamp loose (2.1.1a)

Drive chain slightly tight (6.2.1d)

Offside Rear Wheel alignment slightly misaligned. (2.5.1)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear suspension bearing has slight free play swing arm bearings (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Fuel cap sealing washer torn (7.2.2c)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain slightly tight (6.2.1d)

Offside Rear Wheel alignment slightly misaligned. (2.5.1)

Front Front wheel bearings are slightly rough (2.3.5b)

Nearside Drive chain slightly tight (6.2.1d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Nearside Handlebar mounting clamp bolt loose (2.1.1a) DANGEROUS

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d) DANGEROUS

Rear Footrest missing (6.2.1a) DANGEROUS

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) DANGEROUS

Front Front wheel bearings are slightly rough (2.3.5b)

Nearside Drive chain slightly tight (6.2.1d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Direction indicator affected by the operation of another lamp (1.5.1c)

Front Hydraulic brake control feels spongy (3.1.4a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Lower Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Nearside Front Handlebar deformed (2.1.1b)

Nearside Front Handlebar mounting clamp bolt loose (2.1.1a)

Offside Front Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear Drive chain worn to excess (6.2.1e)

Rear Rear wheel bearings are excessively rough (2.4.A.2c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear reflector on motorcycle missing (1.4.1)

Drive chain excessively loose (6.2.1d)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Offside Front Direction indicators not working (1.5.1c)

Offside Rear Direction indicators not working (1.5.1c)