MOT Status
ValidMileage
117,000 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
parking brake efficiency low
Exhaust system insecure (6.1.2 (a))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
parking brake efficiency low
Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
general underbody corrosion
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes perished (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Coolant level low
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened
corrosion on front and rear suspension components
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Tyre slightly damaged/cracking or perishing n/s/r o/s/r (5.2.3 (d) (ii))
Rear Tyre worn close to legal limit/worn on edge n/s/r o/s/r (5.2.3 (e))
corrosion on front and rear suspension components
Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Tyre slightly damaged/cracking or perishing n/s/r o/s/r (5.2.3 (d) (ii))
Rear Tyre worn close to legal limit/worn on edge n/s/r o/s/r (5.2.3 (e))
corrosion on front and rear suspension components
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Surface corrosion to rear sub frame.
Rear Surface corrosion to rear sub frame.
Rear general surface to corrosion and suspension components
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Stop lamp not working (1.2.1b)
Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Outer Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Outer Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Registration plate lamp shows direct white light to the rear (1.1.C.1f)
Nearside Headlamp aim too high and too far to the right. (1.8)
Offside Headlamp aim too high and too far to the right. (1.8)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV56 UDJ is a 2006 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CV56 UDJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV56 UDJ?
You can check the full history of CV56 UDJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV56 UDJ registered?
CV56 UDJ is a 2006 Mazda 3, first registered on 25 October 2006.
Is CV56 UDJ safe to buy?
The MOT history for CV56 UDJ shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV56 UDJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV56 UDJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.