MOT Status
ExpiredMileage
167,329 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre worn close to legal limit/worn on edge all four worn on inner edges (5.2.3 (e))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre worn close to legal limit/worn on edge all four worn on inner edges (5.2.3 (e))
Exhaust mounting defective (6.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
exhaust system heat shield insecure/deteriorated
general underbody/underbody components corroded
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Exhaust mounting defective (6.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
exhaust system heat shield insecure/deteriorated
general underbody/underbody components corroded
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
only just visible beam pattern on headlights
rear subframe and suspension becoming corroded
under side sills becoming corroded
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CV56 UDW is a 2006 Mazda 3 in Grey with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CV56 UDW, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CV56 UDW?
You can check the full history of CV56 UDW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CV56 UDW registered?
CV56 UDW is a 2006 Mazda 3, first registered on 25 September 2006.
Is CV56 UDW safe to buy?
The MOT history for CV56 UDW shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CV56 UDW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CV56 UDW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.