2010 Toyota Auris

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened both front (5.3.3 (b) (i))

Brake hose ferrule excessively corroded both rear (1.1.12 (f) (i))

Brake pipe excessively corroded both rear (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened both front (5.3.3 (b) (i))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material nearside and offside rear (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear axle beam corroded

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake pipe corroded, covered in grease or other material nearside and offside rear (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear axle beam corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge nearside and offside ON LEGAL LIMIT worn inner edges (5.2.3 (e))

rear under body components slightly corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge nearside and offside ON LEGAL LIMIT worn inner edges (5.2.3 (e))

rear under body components slightly corroded

Nearside Brake pipe corroded, covered in grease or other material front to rears (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills and chassis (5.3.6 (a) (i))

Exhaust heat shield loose

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)