2013 Ford Transit

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive External sill badly corroded (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive External sill badly corroded (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Integral body structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Offside Front Integral body structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick pad (1.1.13 (a) (ii)) DANGEROUS

Offside Front All direction indicators not working (4.4.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Reversing lamp inoperative both (4.6.1 (a))

Offside Front Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Nearside Rear Nail in tyre ()

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

EML light is on

EML light is on

nearside front tyre cut to outer sidewall, no cords or ply exposed

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Registration plate lamp not working (1.1.C.1d)

EML light is on

Offside Front Headlamp aim too low (1.8)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

nearside front tyre cut to outer sidewall, no cords or ply exposed