2002 Peugeot 206

Body has slight corrosion (6.1.B.2)

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Exhaust system not adequately supported (7.1.1)

Nearside Front Outer Front constant velocity joint is insecure (2.5.C.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) not working (1.1.A.3b)

Body has slight corrosion (6.1.B.2)

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Brake load sensing valve linkage stiff (3.6.E.3)

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

engineoil level on minimum

offside front inner rack joint slight play

Nearside Side repeater slightly discoloured (1.4.A.2f)

Oil leak

Front registration plate insecure (6.3.1b)

Fuel tank insecure (7.2.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Stop lamp not working (1.2.1b)

front brake application uneven (3.7.B.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Centre Front Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)