MOT Status
ExpiredMileage
102,997 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Front Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Rear Exhaust system not adequately supported box corroded (7.1.1)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Front Shock absorber has a serious fluid leak (2.7.3) DANGEROUS
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Engine covers fitted obscuring some components in the engine bay
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Parking brake lever has little reserve travel (3.1.6b)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
all rear suspension component bushes perishing
all rear suspension components corroded
exhaust system corroded
n/s and o/s inner sills corroded
n/s side repeater lens broked
n/s/f tyre tread 3mm
n/s/r tyre tread on legal limit [1.6mm] and perishing
o/s/f outer sill corroded and holed [not in pre-scribed area]
o/s/f tyre tread 3mm
o/s/r tyre tread 3mm and perishing
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Wheel nut(s) missing (4.2.A.1e)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Lower Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Front Lower Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Suspension joint nearside lower dust cover split/missing
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp aim too high (1.8)
Suspension joint nearside lower dust cover split/missing
enjine has a major oil leak from filter housing, underside of vehicle is covered in oil. oil level below minimum, REQUIRES ATTENTION NOW
vehicle underside and sills corroded
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust system not adequately supported (7.1.1)
nearside rear tyre wearing on edges
offside front tyre wearing on inner edge
nearside rear tyre wearing on edges
offside front tyre wearing on inner edge
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CW02 HGC is a 2002 Mazda 6 in Blue with a 1,999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2002 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 78,488 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CW02 HGC, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 24 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CW02 HGC?
You can check the full history of CW02 HGC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CW02 HGC registered?
CW02 HGC is a 2002 Mazda 6, first registered on 25 July 2002.
Is CW02 HGC safe to buy?
The MOT history for CW02 HGC shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CW02 HGC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CW02 HGC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.