2003 Peugeot 206

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Fuel tank slightly loose tank strap heavily corroded (6.1.3 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Fuel tank slightly loose tank strap heavily corroded (6.1.3 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Battery insecure (1.9.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Brake load sensing valve seized (3.6.E.3)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Tyre worn close to the legal limit Both sides front (4.1.E.1)

Brake load sensing valve seized (3.6.E.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nail in nearside rear tyre

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Tyre worn close to the legal limit Both sides front (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Rear Brake load sensing valve seized (3.6.E.3)

oil dripping from coolant header tank and radiator

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) not working (1.1.A.3b)

oil dripping from coolant header tank and radiator

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake load sensing valve seized (3.6.E.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Brake load sensing valve seized (3.6.E.3)

fornt and rear tyres --walls cracking

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)