MOT Status
ExpiredMileage
219,073 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
O/S INNER SILL COVERED WITH FILLER
SERVICE 46 % PARK BRAKE 14 % JUST MET REQUIREMENT
Nearside Rear Anti-roll bar severely distorted (2.4.G.1)
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Anti-roll bar fractured (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
N/S & O/S OUTTER SILLS COVERED WITH SIDE SKIRTS
Front Shock absorber has slight corrosion to the casing (2.7.2a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear wheel bearing has slight play (2.6.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Play in steering rack inner joint(s)
Rear coil spring corroded (2.4.C.1b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
all arches corroded
both outer sills have traces of filler
chassis corroded
underbody corroded
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear coil spring cracked (2.4.C.1a)
Registration plate lamp not working (1.1.C.1d)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Headlamp aim too high (1.8)
Inner Rear brake disc excessively pitted (3.5.1h)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Inner Rear brake disc slightly pitted (3.5.1h)
Offside Inner Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CW03 JBY is a 2003 Mazda 6 in Blue with a 1,998cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 71.4%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CW03 JBY, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CW03 JBY?
You can check the full history of CW03 JBY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CW03 JBY registered?
CW03 JBY is a 2003 Mazda 6, first registered on 30 July 2003.
Is CW03 JBY safe to buy?
The MOT history for CW03 JBY shows 14 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CW03 JBY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CW03 JBY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.