2004 Fiat Panda

Front Obligatory mirror missing internal rear view mirror (3.3 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Other passenger door does not latch securely closed (6.2.3 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Offside Rear Other passenger door does not latch securely closed (6.2.3 (a))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Tyre worn close to legal limit/worn on edge 155/80/13 (5.2.3 (e))

Rear Suspension arm corroded but not seriously weakened around spring cups (5.3.3 (b) (i))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Central Exhaust system insecure (6.1.2 (a))

Emissions not tested (8.2.1.2 (d))

Front Registration plate inscription illegible (0.1 (b))

Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front bumper damaged

Nearside Rear Braking system leaking (1.1.3 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Bumper likely to become detached (6.1.4 (a) (ii)) DANGEROUS

Central Exhaust mounting defective system corroded (6.1.2 (a))

Coil spring corroded all four (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both outer sills @rear (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Both rear sills corroded

Coil spring corroded All (5.3.1 (b) (i))

Exhaust corroded

Handbrake imbalance and offside poor effort

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (i))

Tyre worn close to legal limit/worn on edge Both rear (5.2.3 (e))

Brake hose has slight corrosion to ferrules all flexi pipes (3.6.B.4e)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Rear brakes only just meet pass mark

Rear coil spring corroded both springs (2.4.C.1b)

exhaust system @ rear corroded

Centre Exhaust system not adequately supported clamp missing (7.1.1)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

exhaust centre pipe, back box are corrodit

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)