1982 Saab 900

Nearside Rear Tyre worn close to legal limit/worn on edge and out of shape (5.2.3 (e))

Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced boot floor corroded (6.1.1 (c) (i))

Rear Position lamp slightly affected by the operation of another lamp both lamps (4.2.3 (c))

Stop lamp(s) slightly affected by the operation of another lamp (4.3.3 (b))

all underside corroded

both outer sills corroded

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/inner arch (5.3.6 (a) (i))

Rear Exhaust system insecure silencer rubbers (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge and out of shape (5.2.3 (e))

Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced boot floor corroded (6.1.1 (c) (i))

Rear Position lamp slightly affected by the operation of another lamp both lamps (4.2.3 (c))

Stop lamp(s) slightly affected by the operation of another lamp (4.3.3 (b))

all underside corroded

both outer sills corroded

both outter sills corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge and out of shape (5.2.3 (e))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Stop lamp(s) slightly affected by the operation of another lamp both rear (4.3.3 (b))

all underside corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing perishing slightly (5.2.3 (d) (ii))

Offside front handbrake working, but a slightly low reading

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing perishing slightly (5.2.3 (d) (ii))

Offside front handbrake working, but a slightly low reading

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside front handbrake working, but slightly low reading

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wishbone mounting (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside front handbrake working, but slightly low reading

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside front parking brake recording little or no effort (3.7.B.6a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front parking brake recording little or no effort (3.7.B.6a)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Tyre worn close to the legal limit (4.1.E.1)

n/s/r inner side light not working

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Coil spring not correctly located (2.4.C.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s/r inner side light not working

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Front Brake hose bulging under pressure (3.6.B.3)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside front parking brake recording little or no effort (3.7.B.6a)

Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside front brake binding (3.7.B.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Rear rear brake application uneven (3.7.B.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)