2002 Yamaha Teo S

Body work covers up a majority of the chassis/ engine making inspection of some areas impossible.

Nearside Front shock absorber has light misting of stanchion (2.3.3)

There are a number of screws missing from the bodywork however it is secure and not likely to fall off.

Tyres both have low pressures although tyre condition visually is ok, advise having wheel/ tyres checked for leaks.

Front Brake disc(s) slightly scored (3.2.A1l)

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension assembly slightly corroded. (2.3.1)

Rear Tyre valve stem slightly damaged (4.1.2c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake disc(s) slightly scored (3.2.A1l)

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension assembly slightly corroded. (2.3.1)

Rear Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Upper Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Exhaust slightly deteriorated (7.1.1a)

rear carrier slightly loose

Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Upper Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Exhaust mounting deteriorated. (7.1.1.c)

Rear Exhaust slightly deteriorated (7.1.1a)

rear carrier slightly loose