2003 Aprilia RS125R

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have slight free play (2.4.A.2c)

advise all lights marsked out.day light use only

advise wheel alighnment

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake hose fouling (3.2.B3b)

Rear Rear suspension component loose (2.4.A.1a)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

advise wheel alighnment

Front Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bearing has slight free play (2.4.A2a(i))

dip beam poor main beam high and to nearside

puncture repair noted rear tyre

rear indicators close to center line ov bike

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has slight free play (2.4.A2a(i))

dip beam poor main beam high and to nearside

puncture repair noted rear tyre

rear indicators close to center line ov bike

twostroke oil leak

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Rear suspension bearing has excessive free play (2.4.A2a(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Headlamp switch faulty (1.2.4)

Horn not working (1.7.3a)

Nearside Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Temporary fuel cap fitted

speedometer not working

Indicator switch insecure (1.5.4)

Stop lamp remains on when the brake is released (1.3.1e)

Front Brake lever insecure (3.1.2a) DANGEROUS

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b) DANGEROUS

Nearside Handlebar mounting clamp loose (2.1.1a) DANGEROUS

Rear Seat insecure (6.2.1a) DANGEROUS

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c) DANGEROUS

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)