MOT Status
ExpiredMileage
176,310 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting (5.3.6 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is excessively corroded under arch (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded sill inner and outer (2.4.A.3)
Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension component mounting prescribed area is excessively corroded underarch (2.4.A.3)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Suspension component mounting prescribed area is excessively corroded sill inner and outer (2.4.A.3)
Offside Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded x member (2.4.A.3)
Offside Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear rear brake binding (3.7.B.1)
Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear rear brake binding (3.7.B.1)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Nail in offside rear tyre
Centre Upper Stop lamp not working (1.2.1b)
Nail in offside rear tyre
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CX03 XSW is a 2003 Peugeot Boxer in Silver with a 1,997cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Peugeot Boxer models, the average MOT pass rate is 72.7% with a typical mileage of 48,738 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying CX03 XSW, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 23 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CX03 XSW?
You can check the full history of CX03 XSW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CX03 XSW registered?
CX03 XSW is a 2003 Peugeot Boxer, first registered on 2 May 2003.
Is CX03 XSW safe to buy?
The MOT history for CX03 XSW shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CX03 XSW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CX03 XSW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.