2004 Yamaha Yzf R6

Exhaust noisy (8.1.1 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Lower linkage (5.3.4 (a) (i))

Brake indicates slight fluctuation of brake effort Front/Rear (1.2.1 (e))

Exhaust noisy (8.1.1 (a))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Headlamp aim too high (4.1.2 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Front Tyre worn close to the legal limit 2.5mm (4.1.3(ii))

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Rear Tyre worn close to the legal limit 1.6mm (4.1.3(ii))

Drive chain slightly tight (6.2.1d)

Rear Tyre worn close to the legal limit 1mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Roller brake test indicates slight fluctuation of brake effort 20kgf (3.3.A1d)

Rear Tyre worn close to the legal limit 1mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Front Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))