2005 Proton GEN-2

Drive belt worn, but not excessively (6.1.7 (c) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

front exhaust mesh area deteriorated

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Drive belt worn, but not excessively (6.1.7 (c) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

front exhaust mesh area deteriorated

Drive belt worn, but not excessively (6.1.7 (c) (i))

Exhaust mesh area deteriorated

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both rear (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Drive belt worn, but not excessively (6.1.7 (c) (i))

Exhaust mesh area deteriorated

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front exhaust mesh area heavily deteriorated

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear silencer joint corroded

o/s front tyre low in tread

Front exhaust mesh area heavily deteriorated

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) not working (1.1.A.3b)

Rear silencer joint corroded

o/s front tyre low in tread

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Brake servo vacuum pipe split (3.6.C.1b)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Both rear tyres perished

EML on

Nail in offside front tyre

cut n.s.f. tyre wall

exhaust rubbers in poor condition

n.s. handbrake cable insecure

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)