2006 Nissan Navara

Rear Exhaust mounting defective (6.1.2 (a))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Windscreen washer not working (3.5 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear suspension modified / u bolt nut just covering thread

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Seat belt not functioning as intended seatbelt clip / under seat? (7.1.2 (c))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear suspension modified / u bolt nut just covering thread

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Power steering close to minimum mark (2.1.5 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear chassis strengthening plates added

Nearside Front Body component damaged and likely to cause injury spot light lens broken glass (6.2.1 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Headlamp aim too high (4.1.2 (a))

Power steering close to minimum mark (2.1.5 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear chassis strengthening plates added

Central Exhaust mounting defective Mounting loose on chassis. (6.1.2 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Exhaust emissions exceed manufacturer's specified limit 2.08 should be 1.68 (8.2.2.2 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Horn not working (1.6.2a)