2010 Toyota Auris

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle (5.3.6 (a) (i))

Front Windscreen washer not working (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre worn close to legal limit/worn on edge and perished (5.2.3 (e))

Rear Suspension arm corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Nearside Rear Inner Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Inner Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Outer Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Outer Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Inner Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Outer Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Outer Brake pipe excessively corroded (1.1.11 (c))

Rear Body component insecure undertray (6.2.1 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Tyre worn close to legal limit/worn on edge and perished (5.2.3 (e))

Rear Suspension arm corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Windscreen washer not working (3.5 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Manufacturer’s engine and body covers fitted restricting inspection of components

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Manufacturer’s engine and body covers fitted restricting inspection of components

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

front inboard brake discs slightly worn

tested in wet conditions