2016 Yamaha Yzf

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front mudguard missing.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake disc contaminated (1.1.14 (b))

Nearside Front Shock absorber has a serious fluid leak chrome has delaminated and fork is badly corroded. (5.3.2 (b))

Rear Wheel bearing rough when rotated also play. (5.1.3 (b) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp slightly discoloured intensity also reduced. (4.1.4 (a))

Rear Brake pad(s) close to minimum limit uneven wear. (1.1.13 (a))

Rear tyre obviously under inflated.

Exhaust noisy (8.1.1 (a))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Shock absorber has a slightly worn bush lower linkage (5.3.2 (c))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp light intensity severely reduced bulb has fallen inside the lamp unit (4.1.4 (a))

Offside Handlebar fouling on the fuel tank or bodywork on full lock N/S lockstop missing (2.1.4 (b))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement linkjage bearings (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit Outer pad (1.1.13 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))