MOT Status
ValidMileage
132,526 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis rails (6.1.1 (c) (i))
Underside of vehicle covered in underseal
Front Suspension component mounting repair covered in underseal Offside Nearside (5.3.6 (a) (i))
Rear Suspension component mounting repair covered in underseal Offside Nearside (5.3.6 (a) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Front Brake pipe excessively corroded x2 under vehicle (1.1.11 (c))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front anchor mounting (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring shackle mounting (5.3.6 (a) (i))
Offside Front Brake hose ferrule excessively corroded x2 (1.1.12 (f) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing under arch x2 (5.3.6 (a) (i))
Offside Rear Rear reflector missing (4.8.2 (a) (ii))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front anchor mounting (5.3.6 (a) (i))
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Brake pipe corroded, covered in grease or other material some pipes covered in underseal (1.1.11 (c))
NOTE knocking from front,unable to detect source at test. advise more indepth inspection.
NOTE underside of vehicle corroded but heavily covered with underseal.(unable to assess the level of corrosion )(uderside in poor condition)
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear leaf spring corroded
Offside Rear leaf spring corroded
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced outriggers - ALL (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced subframe mounting (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced outriggers - ALL (6.1.1 (c) (i))
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak ()
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Headlamp aim too high (1.8)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak ()
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Brake performance not tested (3.7.A.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Body has a sharp edge caused by damage (6.1.C.1)
Nearside Front Headlamp aim too high (1.8)
Nearside Front engine mounting deteriorated resulting in excessive movement (6.1.D.1a)
Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Brake pipe leaking (3.6.A.1) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brake load sensing valve seized (3.6.E.3)
Exhaust system not adequately supported (7.1.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
slight oil leak from filter
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Side repeater not working (1.4.A.2c)
Nearside rear brake binding (3.7.B.1)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside rear brake binding (3.7.B.1)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.C.1b)
Offside Front Braking system leaking (3.6.A.1) DANGEROUS
exhaust mounting rubbers showing deteriation
n/s wiper showing slight deteriation
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
exhaust mounting rubbers showing deteriation
n/s wiper showing slight deteriation
Offside Front wheel bearing has slight play (2.5.A.3c)
o/s/f tyre tread 3mm near legal limit
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CX51 DGU is a 2002 Peugeot Boxer in Blue with a 2,800cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 67.7%.
Across all 2002 Peugeot Boxer models, the average MOT pass rate is 71.5% with a typical mileage of 48,147 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying CX51 DGU, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 24 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CX51 DGU?
You can check the full history of CX51 DGU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CX51 DGU registered?
CX51 DGU is a 2002 Peugeot Boxer, first registered on 21 January 2002.
Is CX51 DGU safe to buy?
The MOT history for CX51 DGU shows 31 tests with a 67.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CX51 DGU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CX51 DGU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.