2001 Ford Puma

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

outer sills surface corrosion

underside structure surface corrosion

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pans front x 4 (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

outer sills surface corrosion

underside structure surface corrosion

Front Registration plate deteriorated but not likely to be misread and rear (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

both outer sills becoming corroded

n/s and o/s front floors becoming corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Tyre has ply or cords exposed edge (5.2.3 (d) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread and rear (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

both outer sills becoming corroded

n/s and o/s front floors becoming corroded

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill near rear suspension mounting corroded hole, (marked) (6.1.1 (c) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Tyre worn down to cords on inner edge,195/50 R15 82v (5.2.3 (d) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill near rear suspension mounting corroded hole, (marked) (6.1.1 (c) (i))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Brake pipe corroded, covered in grease or other material corroding (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge Tyre worn down on inner edge close to cords,tread in middle 2mm (5.2.3 (e))

Oil leak, but not excessive back of engine (8.4.1 (a) (i))

both front tyres wearing low on inside edges

both outer sills becoming corroded

n/s and o/s front floors becoming corroded

o/s front steel brake pipe becoming corroded under wheel arch

rear number plate becoming deterated

Front Exhaust system not adequately supported (7.1.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

both front tyres wearing low on inside edges

both outer sills becoming corroded

n/s and o/s front floors becoming corroded

o/s front steel brake pipe becoming corroded under wheel arch

rear number plate becoming deterated

Nearside Suspension component mounting prescribed area is excessively corroded centre floor (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded outer sill at rear (2.4.A.3)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar has slight play in a pin bearing (2.4.G.2)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)