2003 Kawasaki ZX-9R

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Chain guard missing ()

fork seal dust covers slightly corroded

slight oil leak from filler cap

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Nearside Rear Direction indicators not working (1.5.1c)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

engine oil level on minimum mark

Drive chain slightly loose (6.2.1d)

Drive chain excessively tight (6.2.1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings have excessive free play (2.3.5b)

Horn not working (1.7.3a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Throttle operating incorrectly (6.2.1f)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Direction indicators not working (1.5.1c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly stiff (2.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Steering movement slightly stiff (2.2.1a)