2003 Peugeot 206

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust system insecure (6.1.2 (a))

Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm 175/70/14 (4.1.E.1)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Oil leak ()

Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp shows direct white light to the rear (1.1.C.1f)

Offside rear parking (secondary) brakes imbalanced (3.7.B.6b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak ()

engine management warning light illuminated

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Oil Leek

Battery insecure (1.9.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Side repeater incorrect colour (1.4.A.2f)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Oil Leek

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

rear wiper blade u/s

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brake load sensing valve seized (3.6.E.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

rear wiper blade u/s

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)