2003 Peugeot 206

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn as marked with yellow marker (5.3.4 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension arm pin or bush excessively worn as marked with yellow marker (5.3.4 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a)

Rear rear brake excessively fluctuating (3.7.B.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Brake load sensing valve linkage stiff (3.6.E.3)

n/s/f tyre worn on outer edges