2003 Nissan Cabstar

Brake hose has slight corrosion to ferrule ALL (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

underbody corrosion

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

under cab corroded

underbody corrosion

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Drag link end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Service brake effort inadequate at a wheel x2 (1.2.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

under cab corroded

underbody corrosion

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

previous repairs covered in underseal

underbody corrosion

Fuel system component leaking fuel filter (6.1.3 (b) (i))

Rear Registration plate inscription illegible (0.1 (b))

Front Brake disc in such a condition that it is seriously weakened x2 (1.1.14 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

previous repairs covered in underseal

underbody corrosion

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

body corrosion

Nearside Vehicle structure is fractured and structural rigidity is significantly reduced body mounting (6.1.1 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis cab (6.1.1 (c) (i))

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

body corrosion

under body corrosion

Fuel tank insecure (6.1.3 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

under body corrosion

Front Drag link end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

surface corrosion to chassis and tipping assembly

Service brake: efficiency below requirements (3.7.B.7)

Front Drag link end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

surface corrosion to chassis and tipping assembly

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

slight corrosion on under body and suspension components

Nearside Front Brake pipe excessively corroded flexi hose (3.6.B.2c)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Brake pipe excessively corroded flexi hose (3.6.B.2c)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

slight corrosion on under body and suspension components

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Side repeater incorrect colour (1.4.A.2f)