2005 MG ZS

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor panel (6.2.2 (d) (i))

underside sprayed with protective paint

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Suspension arm corroded but not seriously weakened all components (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened and component's (5.3.3 (b) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security under side and floor pan (6.2.2 (d) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Upper Hydraulic brake calliper inadequately mounted (1.1.16 (c) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a))

Nearside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Upper Suspension rod pin or bush excessively worn outer bush (5.3.4 (a) (i))

Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Integral body structure is repaired but structural rigidity is not significantly reduced Floorpan (6.1.1 (d) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Standard fitment seat belt missing Rear seats and belts removed ()

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Integral body structure is repaired but structural rigidity is not significantly reduced Floorpan (6.1.1 (d) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Standard fitment seat belt missing Rear seats and belts removed ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

corrosion under vehicle

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust noisy (7.1.4)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)