2008 Suzuki Jimny

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

fuel pipes corroded

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced mounts (6.1.1 (c) (i))

Oil leaking excessively from transmission (8.4.1 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced body mounts/inner wings (6.1.1 (c) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

fuel pipes corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced and rear crossmembers (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced body mounts front panel inner wings (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security and rear (6.2.2 (d) (i))

Rear Passenger seat(s) missing at time of test ()

Seat belt anchorage prescribed area is corroded but not considered excessive sills/floor (7.1.1 (a) (i))

fuel pipes corroded

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced and rear crossmembers (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced body mounts front panel inner wings (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security and rear (6.2.2 (d) (i))

Rear Passenger seat(s) missing at time of test ()

Seat belt anchorage prescribed area is corroded but not considered excessive sills/floor (7.1.1 (a) (i))

fuel pipes corroded

Front Brake hose has slight corrosion to ferrule and rear (1.1.12 (f) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Passenger seat(s) missing at time of test ()

Rear fuel pipes corroded

Seat belt anchorage prescribed area is corroded but not considered excessive inner sills (7.1.1 (a) (i))

Nearside Rear Brake drum contaminated (1.1.14 (b))

Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake hose has slight corrosion to ferrule and rear (1.1.12 (f) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Passenger seat(s) missing at time of test ()

Rear fuel pipes corroded

Seat belt anchorage prescribed area is corroded but not considered excessive inner sills (7.1.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Fuel cap sealing device slightly cracking but not yet affecting sealing

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

underbody corroded but not seriously weakened

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear silencer corroded

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Rear exhaust silencer corroded/split outer shell