2009 Mazda 6

Central exhaust heat shield becoming insecure

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear inner sills corroded

suspension components heavily corroded

Integral body structure is corroded but structural rigidity is not significantly reduced Rear lower inner sill both sides (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Integral body structure is corroded but structural rigidity is not significantly reduced Rear lower inner sill both sides (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Corrosion throughout vehicle

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear axle and suspension components heavily corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive o/s and n/s (5.3.6 (a) (i))

corrosion to all suspension components front and rear

Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive o/s and n/s (5.3.6 (a) (i))

corrosion to all suspension components front and rear

Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Anti-roll bar linkage damaged but not seriously weakened Both sides (5.3.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material Front (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Lower Anti-roll bar linkage damaged but not seriously weakened Both sides (5.3.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material Front (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Outer edges worn

surface rust under side of vehicle and chassis

Nearside Front Body has a sharp edge caused by damage bumper (6.1.C.1)

Nearside Rear Outer edges worn

Nearside Windscreen wiper does not clear the windscreen effectively wiper split (8.2.2)

Offside Headlamp aim too low (1.8)

surface rust under side of vehicle and chassis

Driver's seat insecure (6.2.A.1)

Nearside Front Body has a sharp edge caused by damage corner of bumper (6.1.C.1)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim too far to the right will not adjust (1.8)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

nearside rear tyre worn through to second layer on outer edge.

oil pressure light flashing intermittently

whole of underbody has slight corrosion

Front under tray fitted

Nearside Front Tyre worn close to the legal limit 1.6mm outer tread worn on edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit 2mm outer tread worn on edge (4.1.E.1)

Offside Front Driver's seat insecure (6.2.A.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Nearside Headlamp aim too low (1.8)