2007 Peugeot 107

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Horn not working (7.7 (a))

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by Rear axle mounting point (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill and floor (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i))

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By Rear axle mounting point (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))

hand brake travel doesnt have much reserve

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))

hand brake travel doesnt have much reserve

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting points (5.3.6 (a) (i))

Exhaust system insecure (6.1.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting points (5.3.6 (a) (i))

Windscreen wiper blade defective (3.4 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Brake pipe excessively corroded to rear (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front lower ball joint castle nuts has split pin missing

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Front Tyre worn close to the legal limit both on 3mm (4.1.E.1)

Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside rear brake binding (3.7.B.1)

Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Registration plate lamp not working (1.1.C.1d)

Power steering inoperative (2.3.3a)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)