2010 Toyota Prius

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Signs of corrosion to underside (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective Bracket fractured but system still adequately supported (6.1.2 (a))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Signs of corrosion to underside (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust mounting defective Bracket fractured but system still adequately supported (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened axle beam (5.3.3 (b) (i))

Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Sub-frame corroded but not seriously weakened Front and rear sub frames and suspension components showing signs of corrosion (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Sub-frame corroded but not seriously weakened Front and rear sub frames and suspension components showing signs of corrosion (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security under body and suspension (6.2.2 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security under body and suspension (6.2.2 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Visual inspection of seat and seat belt only

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Heavy rust on inside (1.1.14 (a) (ii))

Nearside Rear Visual inspection of seat and seat belt only

Offside Front Brake disc worn, pitted or scored, but not seriously weakened Heavy rust on inside (1.1.14 (a) (ii))

Rear Rear brake pads wearing thin

Rear Rear disks corroded inner face

Central Exhaust system not adequately supported (7.1.1)

Rear Rear brake pads wearing thin

Rear Rear disks corroded inner face

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)