2015 Qingqi Qm

Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Brake hose slightly deteriorated (1.1.12 (b) (ii))

Drive chain slightly tight (6.1.7 (k) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front damage to head lamp bessel

Front gators fitted to front forks

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Stop lamp not working fault on brake switch (4.3.1 (a) (ii))

Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Brake hose slightly deteriorated (1.1.12 (b) (ii))

Drive chain slightly tight (6.1.7 (k) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front damage to head lamp bessel

Front gators fitted to front forks

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front gattors fitted to front forks can not see oil or dust covers

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Brake lever has slight side movement indicating a worn pedal bearing or pivot lever has minimal reserve travel (1.1.1 (b))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Exhaust system insecure loose at manifold (6.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Registration plate does not conform to the specified requirements reflector encroaches on letters (0.1 (d))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Footrest slightly loose at fixing but seized at pivot (6.2.12 (a))

Front Brake lever has slight side movement indicating a worn pedal bearing or pivot lever has minimal reserve travel (1.1.1 (b))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Rear tyre pressure low