2007 Suzuki Swift

Electronic power steering not working pulling to the nearside at all times, suspect rack failure. (2.6 (c))

Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

possible power steering fault

Offside Front Upper Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i))

Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii))

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Central Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

Central Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Anti-roll bar cracked (2.4.G.1)

Nail in nearside rear tyre

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)