1998 Ford Transit

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

both top marker lights not working

reverse light not working

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

both top marker lights not working

reverse light not working

Nearside Front Suspension component pin or bush slightly worn king pin (5.3.4 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Suspension component pin or bush slightly worn king pin (5.3.4 (a) (i))

reverse light not working

Front Both steering king pins have slight play

Front Registration plate deteriorated but not likely to be misread Slightly damaged (0.1 (b))

Nearside Front Mirror glass is slightly damaged

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust tail pipe is deteriorated, corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Central Brake pipe connection leaking on a hydraulic braking system corrosion holes in pipe to rear (1.1.11 (b) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

general underside corrosion starting

slight damage to n/s bump stop rubber

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

general underside corrosion starting

slight damage to n/s bump stop rubber

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

corrosion holes in both front inner wheel arches not within prescribed areas

general underside corrosion

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

corrosion holes in both front inner wheel arches not within prescribed areas

general underside corrosion

Brake pipe slightly corroded front to rear (3.6.B.2c)

surface corrosion to underside of vehicle

Brake load sensing valve linkage seized (3.6.E.3)

Horn not working (1.6.2a)

Nearside Front Brake back plate(s) securing device excessively deteriorated (3.5.1j)

Offside Headlamp aim too low (1.8)

Rear fog lamp has less than 50% of the light sources illuminating (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded front to rear (3.6.B.2c)

surface corrosion to underside of vehicle

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust mounting missing (7.1.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.5c)

rear brake application uneven (3.7.B.2)

Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2) DANGEROUS

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS

Nearside Headlamp missing (1.7.3) DANGEROUS

Shock absorber has a slightly reduced damping effect (2.7.5)

chassis both sides rear starting to corrode

nearside front bump stop missing

slight lift and wear in both king pins