1996 Jaguar XK8

All direction indicators incorrect colour except repeaters (4.4.3 (a))

Front Windscreen wiper does not clear the windscreen effectively both wiper blades ineffective (3.4 (b) (ii))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Service brake lagging in operation lagging 32% (1.2.1 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength offside and nearside rear inner side sills excessively corroded (5.3.6 (a) (i))

Front Tyre has a tear, caused by separation or partial failure of its structure 245/45/18 both front tyres torn in tread (5.2.3 (d) (ii)) DANGEROUS

Rear Tyre has a tear, caused by separation or partial failure of its structure 255/45/18 both rear inner sidewalls torn (5.2.3 (d) (ii)) DANGEROUS

Front foglamps not working

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

n/s front fog light

reset tracton and abs light

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Direction indicators slightly discoloured (1.4.A.2f)

Electronic stability system warning lamp does not illuminate (3.4.1b)

Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Vehicle structure has slight damage (6.1.A.1)

Direction indicators slightly discoloured (1.4.A.2f)

Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Vehicle structure has slight damage (6.1.A.1)

n/s front fog light

reset tracton and abs light

Direction indicators slightly discoloured (1.4.A.2f)

front disc

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Direction indicators slightly discoloured (1.4.A.2f)

front disc's are corroded

Nearside Front Brake pad(s) wearing thin (3.5.1g)

slight leak steering rack

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

slight leak steering rack

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate font not substantially similar to the prescribed font (6.3.4d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate font not substantially similar to the prescribed font (6.3.4d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)