1986 Land Rover Defender

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

chassis underbody etc , painted/undersealed

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper not working (3.4 (a))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underside , chassis etc undersealed/painted

Nearside Front Track rod end ball joint has slight play rearmost (2.2.B.1f)

area around brake servo slightly corroded

chassis corroded

offside and nearside rear brake back plates damp

oil leak

steering box damp (close to excessive)

Nearside Headlamp aim too low (1.8)

Offside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt steering box drop arm (2.2.C.1c)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear reflector missing (1.5.1a)

Parking brake: efficiency below requirements (3.7.C.1b)

Power steering pipe(s) or hose(s) leaking pipe at join at bottom of power steering pump (2.3.3b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Track rod end ball joint has slight play rearmost (2.2.B.1f)

area around brake servo slightly corroded

chassis corroded

offside and nearside rear brake back plates damp

oil leak

Nearside Front Front position lamp(s) not working doesn't illuminate with first click of the switch (1.1.A.3b)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Brake master cylinder/servo mounting prescribed area is excessively corroded bulkhead (3.6.C.3)

Offside Front Front position lamp(s) not working doesn't illuminate with first click of the switch (1.1.A.3b)

Offside Front Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.C.1b)

Power steering component(s) leaking from bottom of steering box (2.3.3b)

chassis slightly corroded

nearside and offside 'A' pillars corroded

nearside and offside front position lamps only illuminated when headlamps are switch on

nearside and offside rear brake backing plates damp

play in the steering system

Brake pedal anti-slip provision missing (3.3.A.1b)

Horn not working (1.6.2a)

Nearside Headlamp aim too low (1.8)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member (6.6.6)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp aim too low (1.8)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member (6.6.6)

Offside Side repeater not working (1.4.A.2c)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Windscreen washer provides insufficient washer liquid BOTH (8.2.3)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Battery insecure

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

battery tray corroded

Brake performance not tested (3.7.A.1)

Centre Brake pipe excessively corroded (3.6.B.2c)

Centre Braking system leaking (3.6.A.1)

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Suspension component mounting prescribed area is fractured (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Suspension component mounting prescribed area is fractured (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear rear brake binding (3.7.B.1)

Rear Brake pipe excessively corroded (3.6.B.2c)

Service brake: efficiency below requirements (3.7.B.7)