2008 Fiat Ducato

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive underside corroded in several places (5.3.6 (a) (i))

Front Windscreen washer not working (3.5 (a))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Suspension component mounting prescribed area is corroded but not considered excessive underside corroded in several places (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front sill corroded and holed not percribed area

underside weld repaired to percribed area

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front sill corroded and holed not percribed area

underside weld repaired to percribed area

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill front spring mounting x 2 holes (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear panel (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear panel (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement front arms both sides (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Shock absorbers has light misting of oil both front shocks (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

front and rear discs and pads worn

front shocks worn

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Shock absorbers has light misting of oil both front shocks (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement both front lower arms (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

front and rear discs and pads worn

front shocks worn

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive hole in rear chassie not within 30cm of front spring mounting but very close (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Direction indicators not working (1.4.A.2c)

All standard equipment guards fitted at time of test not allowing full inspection

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too low (1.8)

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Nearside Front Headlamp aim too high and too far to the left. (1.8)

Offside Front Headlamp aim too high (1.8)

Offside Front Obligatory mirror insecure (8.1.1)