2003 Land Rover Discovery

Nearside Rear Body fixing missing, but overall security not significantly reduced rear sill (6.2.2 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Body fixing missing, but overall security not significantly reduced rear sill (6.2.2 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Wheel/tyre protruding beyond wheel arch all

Nearside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear sill/body mount corroded but not in prescribed area

Offside Rear sill/body mount corroded but not in prescribed area

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Fuel system component leaking fuel filter (6.1.3 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear fault on central locking

Nearside Front Track rod end ball joint has slight play Back one (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Brake disc worn, but not excessively both front (1.1.14 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Prop shaft joint worn, but not excessively both joints in front shaft (6.1.7 (c) (i))

Suspension arm ball joint dust cover severely deteriorated both front lower (5.3.4 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

suspension stability pipes corroded

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both front lower (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)

brake pipes greased before test

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt both front lower (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

brake pipes greased before test

Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

brake pipes greased before test

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Vehicle structure has slight corrosion (6.1.A.1)

Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has an excessively worn bush (2.7.4)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)