2012 Kia Venga

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Reversing lamp does not emit a steady white light (4.6.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

VEHICLE UNDERSEALED

Horn not working (7.7 (a))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Sub-frame corroded but not seriously weakened support bracket (5.3.3 (b) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

rear axle corroded

Front Windscreen washer not working (3.5 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Sub-frame corroded but not seriously weakened support bracket (5.3.3 (b) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

rear axle corroded

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material covered in grease (1.1.11 (c))

Rear fuel tank heat shield insecure

Rear rear axle corroded but not excessive

Front Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Brake pipe excessively corroded both sides (1.1.11 (c))

Rear Brake hose ferrule excessively corroded and likely to fail both sides (1.1.12 (f) (ii)) DANGEROUS

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material covered in grease (1.1.11 (c))

Rear fuel tank heat shield insecure

Rear rear axle corroded but not excessive

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing on the tread (5.2.3 (d) (ii))

Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Play in steering rack inner joint(s)

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))