1987 BMW 5 Series

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Fuel Pipe/s corroded

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Parking brake lever defective but can be satisfactorily operated release button retracted into lever handle (1.1.6 (d))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm pin or bush excessively worn Rear lower arm inner bush (5.3.4 (a) (i))

Offside Windscreen washer not working (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear lower arm inner bush (5.3.4 (a) (i))

Parking brake lever defective but can be satisfactorily operated release button retracted into lever handle (1.1.6 (d))

Offside Rear Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

both front lower suspension arm rear bushes are starting to wear slightly.

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill and jacking point area (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Windscreen washer not working (3.5 (a))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a) (ii))

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen washer provides insufficient washer liquid jet (8.2.3)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Fuel pipe/s corroded

rear floor pan corroded

engine not switching off when key removed

Nearside Front front brake binding (3.7.B.1)

Nearside Rear front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly damaged (2.2.D.2b)

Fuel pipe/s corroded

rear floor pan corroded

engine not switching off when key removed

Brake pipe slightly corroded (3.6.B.2c)

Fuel pipe/s corroded

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Steering column universal joint has slight play (2.1.5)

corrosion nearside front floor pan

sill covers fitted

Battery insecure (1.9.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel pipe/s corroded

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Steering column universal joint has slight play (2.1.5)

sill covers fitted

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tie bar/rod rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tie bar/rod rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

boot pan & towing eye badly corroded

An item not tested (Manual)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake hose bulging under pressure (3.6.B.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

boot pan & towing eye badly corroded

Nearside Ball joint has excessive play (2.2.B.1f)

Offside Ball joint has excessive play (2.2.B.1f)

Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Track rod end ball joint has slight play (2.2.B.1f)

Offside Outer Track rod end ball joint has slight play (2.2.B.1f)