1986 BMW 3 Series

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

both front coil spring seating top + bottom rubbers worn

Front Brake pipe slightly corroded (3.6.B.2c)

Front bumper insecure

Fuel pipe/s corroded

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear bumper insecure

Nearside Rear Stop lamp remains on when the brakes are released (1.2.1e)

Offside Front Side repeater not working (1.4.A.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pipe slightly corroded (3.6.B.2c)

Front bumper insecure

Fuel pipe/s corroded

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear bumper insecure

Brakes imbalanced across an axle (3.7.B.5b)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Headlamp aim not tested (1.8.A.1c)

Horn not loud enough to be heard by another road user (1.6.2b)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Power steering malfunctioning (2.3.3a)

Headlamp masks/converters fitted

Oil leak

front discs pitted

general corrsion to undeside & components

rear tyres perishing in tread

Brake hose slightly deteriorated (3.6.B.4d)

rear axle bushs deteriorated but funtioning as intended

Nearside Headlamp aim too high (1.8)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

both rear brake flexi hoses ends slightly corroded

brake warning lamp on

Brake hose ferrule excessively corroded (3.6.B.4e)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside front brake binding (3.7.B.1)

Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

oil leak from engine