1987 Austin Mini 1000 City E

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Play in steering rack inner joint(s) ()

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Main beam tell-tale not working (4.9.1 (a) (ii))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp aim not tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Front floor to outer sill is rusty and weak

Nearside Play in steering rack inner joint(s) ()

Offside Front Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Offside Front floor to outer sill is rusty and weak

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor and rear valance for subframe mount (6.2.2 (d) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor and rear valance for subframe mount (6.2.2 (d) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Front floor to outer sill is rusty and weak

Nearside Play in steering rack inner joint(s) ()

Offside Front Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Offside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front floor to outer sill is rusty and weak

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component ball joint has slight play both (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 1.6-2mm (5.2.3 (e))

Offside Front Suspension component ball joint has slight play both (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 1.6-2mm (5.2.3 (e))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component ball joint has slight play both (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 1.6-2mm (5.2.3 (e))

Offside Front Suspension component ball joint has slight play both (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 1.6-2mm (5.2.3 (e))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe front mounting (5.3.6 (a) (i))

Offside Front Tyre(s) with different aspect ratios are fitted on twin wheels (5.2.3 (b))

Nearside Front Play in steering rack inner joint(s) ()

Rear shockers not working as should

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front front brake application uneven (3.7.B.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing shocker top (2.4.A.3)

Nearside Front front brake binding (3.7.B.1)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing shocker top (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front registration plate character(s) likely to be misread (6.3.4b)

Hazard warning switch faulty (1.4.B.1d)

Headlamp switch faulty (1.7.1)

Nearside Front Inner Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Nearside Rear Subframe mounting prescribed area is excessively corroded wheel arch front (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Subframe mounting prescribed area is excessively corroded wheel arch front (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Nearside Rear shocker not working

Offside Rear shocker not working

clutch pedal rubber missing

offside headlight dim

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emits dense blue smoke at idle (7.3.A.2b)

Exhaust system not adequately supported (7.1.1)

Nearside Headlamp aim too high (1.8)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

clutch pedal rubber missing

offside headlight dim

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Front registration plate deteriorated (6.3.1d)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Under-trays fitted obscuring some underside components

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear fog lamp insecure (1.3.2a)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear fog lamp insecure (1.3.2a)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front front brake binding (3.7.B.1)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear fog lamp not working (1.3.2b)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Steering rack insecure (2.2.B.1a)

rear brake recording little or no effort (3.7.B.5a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Upper Front suspension locking device missing (2.5.A.4)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

nearside rear suspension trumpet insecure when vehicle is jacked up