2003 Honda NS125

Clutch lever bent (6.2.1g)

Drive chain slightly tight (6.2.1d)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust slightly deteriorated (7.1.1a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

N/S Handlebar control block loose

Rear suspension bush has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Chain guard fouling another component chain (6.2.1c)

Exhaust mounting does not fully support the exhaust system center mount (7.1.1.c)

Fairings insecure and likely to impede the steering lower fairing insecure (2.1.2e)

Offside Rear Rear suspension component loose wheel alignment adjuster (2.4.A.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Headlamp insecure (1.2.3b)

Front Steering headbearing has excessive free play (2.2.2)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Steering headbearing has excessive free play (2.2.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front shock absorber has light misting of stanchion (2.3.3)

Pillion footrests not fitted

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

All position lamps adversely affected by the operation of another lamp (1.1.3b)

Direction indicators affected by the operation of another lamp (1.5.1c)

Horn emits 2 or more alternating tones (1.7.3b)

Stop lamp affected by the operation of another lamp (1.3.2)

Front suspension has inadequate damping effect. (2.3.6c)

Steering headbearing has excessive free play (2.2.2)

Exhaust noisy (7.1.2)